We take pride in our customer interactions
Discover Mountable Solar
All the solar collecting capability you need to power life off grid, whether that's in case of an emergency or on the road. Built with strong tempered glass and an aluminum frame, our Mountable Boulder Solar Panels are ideal for semi-permanent or permanent installation.
short
The Flex 100i is a flexible monocrystalline solar panel designed for versatility. It works on flat and curved surfaces so you can mount it on vans, RVs, and overland vehicles for renewable power off the grid, wherever you go. IP67 waterproof rating. Requires MC4 Solar to HPP Adapter Cable (98014) to plug directly into a Yeti. Sold Separately.Â
tech
CHARGE TIMES
- Yeti 1000X: 12-24 Hours
- Yeti 1500X: 18-36 Hours
- Yeti 3000X: 36-72 Hours
- Yeti Pro 4000: 47-94 Hours
GENERAL
- Product SKU: 32425
- Weight: 4.85 lbs. (2.2 kg)
- Dimensions: 38.97 x 23.03 x 0.09 in. (990 x 585 x2.55 mm)
- Minimum Bend Radius: 0.4 m in Y direction
- Warranty: 2 years
- Operating Temperature Range: -40-185 °F (-40-85 °C)
PORTS
- Output Port: 4MM (MC4) Male & Female: 1500 V 30 AÂ
- Cable Length: 2.95 ft (0.9 m)Â
- Gauge: 12 AWG
SOLAR
- Rated Power: 100 Watts
-
Peak Power Operating Voltage (Vmp): 17.1 V
-
Peak Power Operating Current (Imp): 5.84 A
- Cell Type: Monocrystalline
-
Open Circuit Voltage (Voc): 20.52 V
-
Short Circuit Current (Isc): 6.14 A
-
Series Fuse Rating: 9 A
-
Temperature Coefficient (Voltage): -0.30%/°C
-
Ingress Protection: IP67
box
Flex 100i HIGHLIGHTS
- Renewable Off-Grid Power Get reliable, clean, renewable energy while you’re off the grid! The Flex 100i is a versatile 100 W monocrystalline solar panel that can recharge your power station from almost anywhere.
- Flexible and Versatile This flexible solar panel is ideal for a wide variety of installations. It’s great for vans, trailers, RVs, boats, and other curved surfaces.
- Adventure-Proof Design The Flex 100i can stand up to the elements and extreme temperatures. It has an IP67 waterproof rating, so you don’t have to worry about it in the rain or snow.
- Thin and Lightweight The Flex 100i weighs less than 5 pounds and is 63% lighter than our rigid 100 W Boulder 100i panel. It is also extremely thin (0.09 inches)—in fact it’s 92% thinner than the Boulder 100i (with the exception of the junction box, which is still less than 1 inch thick).
- High Efficiency The Flex 100i has an industry-leading efficiency rating for optimal energy collection, conversion, and retention.
Pair Your Panel With a Power Station
See estimates for how quickly your solar panel can recharge Yeti power stations.
Note: Requires MC4 Solar to HPP Adapter Cable (98014) to plug directly into a Yeti. Sold Separately. Charge times will vary based on elevation, temperature, time of year, and angle/position of the panel.
Tips & Tricks for using solar panels
- Your solar panel collects energy, but does not store it. In order to use it, connect it to a power station, or charge your devices directly with the cables attached to the panel.
- Adjust your solar panel throughout the day for optimal sun exposure.
- Don't forget that you can still use your panel on a cloudy day, it will just be less efficient.
- Use ground stakes to secure your panel while you're away.
short
This efficient 100W solar panel is designed to be easy to install. Mount it to the roof of your van, RV, or home to collect clean energy from the sun. Requires MC4 Solar to HPP Adapter Cable (98014) to plug directly into a Yeti. Sold Separately.Â
tech
CHARGE TIMES
- Yeti 1000X: 12-24 Hours
- Yeti 1500X: 18-36 Hours
- Yeti 3000X: 36-72 Hours
- Yeti Pro 4000: 47 - 94 Hours
GENERAL
- Product SKU: 32420
- Weight:Â 13.2 lbs. (6 kg)
- Dimensions: 38.6 x 23.0 x 1.2 in. (98 x 58.6 x 3 cm)
- Mounting: Z brackets included
- Warranty: 2 years
- Operating Temperature Range: -40-185 °F (-40-85 °C)
PORTS
- Output Port: 4MM (MC4) M/F: 1500 V 30 AÂ 0.9 mÂ
- Guage: 12 AWG
SOLAR
- Rated Power: 100 Watts
-
Peak Power Operating Voltage (Vmp): 17.1 V
-
Peak Power Operating Current (Imp): 5.84 A
- Cell Type: Monocrystalline
-
Open Circuit Voltage (Voc): 20.52 V
-
Short Circuit Current (Isc): 6.14 A
-
Series Fuse Rating: 9 A
-
Temperature Coefficient (Voltage): -0.30%/°C
-
Ingress Protection: IP67
box
BOULDER 100i HIGHLIGHTS
- Installable This installable solar panel is perfect for mounting to your van or RV for extra power on your next road trip.
- Efficient The Boulder 100i has an industry-leading efficiency rating for optimal energy collection and conversion.
- Sturdy Construction The Boulder 100i is built with strong tempered glass and an aluminum frame. It has an IP67 rating for outdoor use and is waterproof so it can stand up to the elements while collecting energy.
Pair Your Panel With a Power Station
See estimates for how quickly your solar panel can recharge Yeti power stations.
Note: Requires MC4 Solar to HPP Adapter Cable (98014) to plug directly into a Yeti. Sold Separately. Charge times will vary based on elevation, temperature, time of year, and angle/position of the panel.
Tips & Tricks for using solar panels
- Your solar panel collects energy, but does not store it. In order to use it, connect it to a power station, or charge your devices directly with the cables attached to the panel.
- Adjust your solar panel throughout the day for optimal sun exposure.
- Don't forget that you can still use your panel on a cloudy day, it will just be less efficient.
- Use ground stakes to secure your panel while you're away.
short
Rugged, durable, rigid. Tempered glass and aluminum frame construction with added corner protection make this a perfect panel for a permanent installation. Ideal for recharging a Yeti 200X.
box
BOULDER 50 HIGHLIGHTS
- 50-Watt (14-22V) panel features integrated kickstand providing optimal angle placement.
- Built with strong tempered glass and an aluminum frame with added corner protection.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Yeti 150: Charges in 5-10 Hours
Yeti 200X: Charges in 5-10 Hours
Yeti 400: Charges in 12-24 Hours
Yeti 500X: Charges in 12-24 Hours
Yeti 1000X: Charges in 23-46 Hours
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it only produces power when it is exposed to sunlight and connected to a power station or bank.
- Optimize solar panel efficiency by positioning them south-facing at a 45-degree angle.
- For faster recharging, use multiple solar panels.
tech
CHARGE TIMES
- Yeti 150: 5-10 Hours
- Yeti 200X: 5-10 Hours
- Yeti 400: 12-24 Hours
- Yeti 400 Lithium: 12-24 Hours
- Yeti 500X: 12-24 Hours
- Yeti 1000 Lithium: 31-62 Hours
- Yeti 1000X: 23-46 Hours
- Yeti 1400 Lithium: 43-86 Hours
GENERAL
- Product SKU: 32406
- Chainable: up to 150 Watts
- Weight: 12.4 lbs (5.6 kg)
- Dimensions: 21.75 x 26.75 x 1.75 in. (55.2 x 70 x 4.4 cm)
- Warranty: 2 years
PORTS
- Solar port (blue, 8mm) output: 14-22V, up to 3.5A (50W max)
- Solar port (blue, 8mm) input chaining: up to 150W total
SOLAR
- Rated Power: 50 Watts
- Open Circuit Voltage: 18-20V
- Cell Type: Monocrystalline
short
The larger Boulder 100 is equipped with the same rugged design as the Boulder 50 but double the Watts. Mount this panel to efficiently charge your Yeti 500X or combine multiple panels together for large power stations.
tech
CHARGE TIMES
- Yeti 200X: 2-4 Hours
- Yeti 400: 6-12 Hours
- Yeti 400 Lithium: 7-14 Hours
- Yeti 500X: 6-12 Hours
- Yeti 1000 Lithium: 16-32 Hours
- Yeti 1000X: 12-24 Hours
- Yeti 1400 Lithium: 22-44 Hours
- Yeti 1500X: 18-36 Hours
- Yeti 3000 Lithium: 36-72 Hours
- Yeti 3000X: 36-72 Hours
GENERAL
- Product SKU: 32407
- Weight: 20.1 lbs (9.1 kg)
- Dimensions: 40.0 x 26.75 x 1.75 in. (101.6 x 70 x 4.4 cm)
- Cable Length: 6 ft
- Warranty: 2 years
PORTS
- Solar Port: (blue, 8mm): 14-22.5V up to 7A (100W max)
SOLAR
- Rated Power: 100 Watts
- Open Circuit Voltage (Voc) 22.5V
- Maximum Power Point Voltage (Vmpp)
- Cell Type: Monocrystalline
box
BOULDER 100 HIGHLIGHTS
- 100-Watt (14-22V) panel features integrated kickstand providing optimal angle placement.
- Built with strong tempered glass and an aluminum frame with added corner protection.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it only produces power when it is exposed to sunlight and connected to a power station or bank.
- Optimize solar panel efficiency by positioning them south-facing at a 45-degree angle.
- For faster recharging, use multiple solar panels.
short
A simple mounting bracket kit for installing the Boulder 50 or 100 Solar Panels. Comes with four brackets and hardware, ideal for installation on vehicle roofs and non-inhabited buildings.
tech
GENERAL
- Product SKU: 44050
- Product Weight: 2.2 oz (62 g) per bracket
- Dimensions: 3.5 x 2.25 x 1.5 in. (8.9 x 5.7 x 3.8 cm)
- Warranty: 2 years
short
Pack up your solar panels and easily transport them with a durable travel case. Includes built-in handle and removable shoulder strap. Zippered bag fits the Boulder 100 Briefcase, or two Boulder 50 Solar Panels.
tech
GENERAL
- SKU: 92100
- Dimensions: 28 x 22 x 4 in. (71.1 x 55.9 x 10.2 cm)
- Weight:1.8 lbs (0.82 kg)
short
Pack up your solar panels and easily transport them with a durable travel case. Includes built-in handle and removable shoulder strap. Zippered bag fits the Boulder 200 Briefcase, or two Boulder 100 Solar Panels.
tech
GENERAL
- SKU: 92200
- Dimensions: 41 x 28 x 4 in. (104.1 x 71.1 x 10.2 cm)
- Weight: 2.7 lbs (1.22 kg)
short
Best stationary solar charge kit for the Yeti 1500X. Three Boulder 100 Solar Panels, a 4x 8mm High Power Port (HPP) Combiner, a 30 ft. HPP Extension Cable, and mounting brackets – this kit is essential for any van build or home backup.Â
features
BOULDER 100 HIGHLIGHTS
- 100-Watt (14-22V) panel features integrated kickstand providing optimal angle placement.
- Built with strong tempered glass and an aluminum frame with added corner protection.
WHAT CAN THE BOULDER 100 CHARGE?
The solar panel does not hold a charge it produces power when it is exposed to sunlight. Connect it to recharge a portable power station. The Boulder 100 is best used for recharging Goal Zero Yeti Portable Power Stations.
RECOMMENDED YETI PAIRINGS
Yeti 500X: Charges in 6-12 Hours
Yeti 1000X: Charges in 12-24 Hours
Yeti 1500X: Charges in 18-36 Hours
Yeti 3000X: Charges in 36-72 Hours
tech
CHARGE TIMES
- Yeti 1000 Lithium: 5-10 Hours
- Yeti 1000X: 4-8 Hours
- Yeti 1400 Lithium: 7-14 Hours
- Yeti 1500X: 6-12 Hours
- Yeti 3000 Lithium: 12-24 Hours
- Yeti 3000X: 12-24 Hours
*Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
GENERAL
- KIT SKU: 44547
- Product SKU: 32407
- Weight: 20.1 lbs (9.1 kg)
- Dimensions: 40.0 x 26.75 x 1.75 in (101.6 x 70 x 4.4 cm)
- Cable Length: 6 ft.
- Warranty: 2 years
PORTS
- Solar Port: (blue, 8mm): 14-22.5V up to 7A (100W max)
SOLAR
- Rated Power: 100 Watts
- Open Circuit Voltage (Voc) 22.5V
- Maximum Power Point Voltage (Vmpp)
- Cell Type: Monocrystalline
short
Ideal for situations where power needs are large, but space is limited, this panel provides 200 Watts of solar and folds down to a quarter of its full size.Â
box
NOMAD 200 HIGHLIGHTS
-
Protective Enclosure
Four monocrystalline panels enclosed in a protective case fold down to a compact profile for easy storage. Hanging loops allow you to strap the panel to vehicles, tents, and more. -
Secure Placement
Built-in legs pop out to stabilize the panel while solar charging and fasten in place against the panel when not in use. Each leg features a stake-down loop for added security. -
Integrated Cables
Included 6 ft. HPP Charging Cable integrates seamlessly with Goal Zero Yeti Power Stations and stores away in our signature built-in mesh case for convenience.
Recommended Yeti Pairings
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it produces power when it is exposed to sunlight.
- Place solar panels towards the sun at an angle.
- Connect High Power Port to Yeti Power Station.
- Adjust solar panel as the sun moves across the sky.
tech
CHARGE TIMES
- Yeti 400: 3-6 Hours
- Yeti 400 Lithium: 4-7 Hours
- Yeti 500X: 3-6 Hours
- Yeti 1000 Lithium: 8-16 Hours
- Yeti 1000X: 6-12 Hours
- Yeti 1400 Lithium: 11-22 Hours
- Yeti 1500X: 9-18 Hours
- Yeti 3000 Lithium: 18-36 Hours
- Yeti 3000X: 18-36 Hours
- Yeti PRO 4000: 24-48 Hours
- Yeti 6000X: 35-70 Hours
GENERAL
- SKU: 11930
- Weight: 22lbs (10.0 kg)
- Dimensions (folded): 28.2 x 22.3 x 2.0 in (71.6 x 56.6 x 5.0 cm)
- Dimensions (unfolded, without leg stand): 28.2 x 100.7 x 1.0 in (71.6 x 255.8 x 2.5 cm)
- Cable Length: 6ft
- Warranty: 2 Years
- UPC: 847974007983
PORTS
- High Power Port: 14-23V, up to 14A (200W max)
- USB-A: 5V, 2.4A(12W max)
SOLAR
- Rated Power: 200W
- Open Circuit Voltage (Voc): 23.0V
- Maximum Power Point Voltage (Vmpp): 19.1V
- Cell Type: Monocrystalline
short
Portable, rugged, and powerful, this 100-Watt lightweight, foldable panel features built-in charging cables for Yeti Power Stations. Combine multiple panels to maximize solar input on your next overlanding trip.Â
box
NOMAD 100 HIGHLIGHTS
- 100-Watt (14-22V) foldable and weatherproof solar panel.
- Big wattage and weighs only 10 lbs. For chaining multiple Nomad 100 Solar Panels together, purchase a 4X 8mm Combiner to High Power Port Connector.
WHAT CAN THE NOMAD 100 CHARGE?
The solar panel does not hold a charge it produces power when it is exposed to sunlight. Connect it to recharge a portable power station. The Nomad 100 is best used for recharging Goal Zero Yetis.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it produces power when it is exposed to sunlight.
- Place solar panels towards the sun at an angle.
- Connect 8.0mm solar port to Yeti Power Station.
- Adjust solar panel as the sun moves across the sky.
tech
CHARGE TIMES
- Yeti 200X: 2-4 hours
- Yeti 400: 6-12 Hours
- Yeti 400 Lithium: 7-14 Hours
- Yeti 500X: 6-12 Hours
- Yeti 1000 Lithium: 16-32 Hours
- Yeti 1000X: 12-24 Hours
- Yeti 1400 Lithium: 22-44 Hours
- Yeti 1500X: 18-36 Hours
- Yeti 3000 Lithium: 36-72 Hours
- Yeti 3000X: 36-72 Hours
- Yeti PRO 4000: 47- 94 Hours
GENERAL
- Product SKU: 13007
- Weight: 10.2 lbs (4.6 kg)
- Dimensions (unfolded): 20.5 x 59.5 x 1 in (52 x 151.1 x 2.54 cm)
- Dimensions (folded): 20.5 x 15.5 x 2 in (52 x 39.37 x 5.08 cm)
- Cable Length: 6ft
- Warranty: 2 Years
PORTS
- Solar Port (blue 8mm, male): 14-22V, up to 5.56A (100 max)
SOLAR
- Rated Power: 100 Watts
- Open Circuit Voltage (Voc) 21.5V
- Maximum Power Point Voltage (Vmpp): 18.0V
- Maximum Power Point Current (Impp): 5.56A
- Short Circuit Current (Isc): 5.9A
- Cell Type: Monocrystalline
short
Built with tempered glass and a strong aluminum frame, this durable panel withstands heavy-duty use. A hinged design and canvas bag make for easy carrying to help keep your gear charged on the move.
box
BOULDER 100 BRIEFCASE HIGHLIGHTS
- 100 total Watts - two 50-Watt panels (14-21.5V) chained together and connected by a hinge.
- Built with strong tempered glass and an aluminum frame with added corner protection.
- Included is a protective canvas bag for easy transport and carrying.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it only produces power when it is exposed to sunlight and connected to a power station or bank.
- Optimize solar panel efficiency by positioning them south-facing at a 45-degree angle.
- For faster recharging, use multiple solar panels.
tech
CHARGE TIMES
- Yeti 200X: 2-4 Hours
- Yeti 400: 6-12 Hours
- Yeti 400 Lithium: 7-14 Hours
- Yeti 500X: 6-12 Hours
- Yeti 1000 Lithium: 16-32 Hours
- Yeti 1400 Lithium: 22-44 Hours
- Yeti 1000X: 12-24 hours
- Yeti 1500X: 18-36 Hours
- Yeti 3000 Lithium: 36-72 Hours
- Yeti 3000X: 36-72 Hours
- Yeti PRO 4000: 47-94 Hours
GENERAL
- Product SKU: 32408
- Weight: 25.9 lbs (11.7 kg)
- Dimensions (folded): 26.75 x 21.75 x 3.75 in (70 x 55.2 x 8.9 cm)
- Dimensions (unfolded): 26.75 x 43.5 x 1.75 in (70 x 110.4 x 4.4 cm)
- Cable Length: 6 ft.
- Warranty: 2 years
PORTS
- Solar Port (blue, 8mm): 14-21.5V, up to 7A (100W max)
SOLAR
- Rated Power: 100 Watts
- Open Circuit Voltage (Voc): 21.5V
- Maximum Power Point Voltage (Vmpp): 17.2V
- Cell Type: Monocrystalline
short
The Nomad 400 gives you lots of power in a lightweight, portable design. You can take it on the road and use it to recharge your Yeti indefinitely or keep it at home so you can still collect power for emergency backup when the grid is down.
tech
CHARGE TIMES
- Yeti PRO 4000: 12 - 24 Hours
- Yeti PRO 8000: 24 - 48 Hours
- Yeti 1500X: 4 - 8 Hours
- Yeti 3000X: 9 - 18 Hours
- Yeti 6000X: 18 - 36 Hours
GENERAL
- Product SKU: 11950
- Weight:Â 36.60 lbs. (16.6 kg)
- Dimensions (Folded): 28.54 x 31.69 x 1.18 in. (72.5 x 80.5 x 3 cm)
- Dimensions (Unfolded):Â 113.98 x 31.69 x 0.2 in. (289.5 x 80.5 x 0.5 cm)
- Panel Construction: Lamination
- Ingress Protection: IP65
- Warranty: 2 Year
- Operating Temperature Range: -40-185 °F (-40-85 °C)
- Maximum System Voltage: 1000 V
PORTS
- Output Port (HPP): 14-150V, 40 A, 400W
- Cable Length: 35.43 in (0.9 m)
- Guage: 12 AWG
- 15 ft HPP Extention (Included): 15 ft, 12 AWG
- Output Port (USB-A): 5 V, 2.4 A, 12 W, 7.87 in (0.2 m) 12 AWG
SOLAR
- Rated Power: 400 Watts
- Peak Power Operating Voltage (Vmp): 20.66 V
- Peak Power Operating Current (Imp): 20.45 A
- Cell Type: Monocrystalline
- Open Circuit Voltage (Voc): 23.84 V
- Short Circuit Current (Isc): 20.45 A
- Series Fuse Rating: 15 A
- Temperature Coefficient (Voltage): -0.30%/°C
- Temperature Coefficient (Current): -0.44%/°C
- Temperature Coefficient (Power): -0.44%/°C
box1
NOMAD 400 HIGHLIGHTS
- POWERFUL This portable panel provides 400 Watts of solar so you can recharge your power station faster.
- PORTABLE The Nomad 400 is designed to be easy to take with you, whether you’re overlanding, camping, or setting up in the backyard during a power outage. It’s lightweight and folds down to be more compact—plus it includes a shoulder strap and carrying handles.
- EFFICIENT The Nomad 400 has an industry-leading efficiency rating for optimal energy collection, conversion, and retention.
Pair Your Panel With a Power Station
See estimates for how quickly your solar panel can recharge Yeti power stations.
Note: Charge times will vary based on elevation, temperature, time of year, and angle/position of the panel.
Tips & Tricks for using solar panels
- Your solar panel collects energy, but does not store it. In order to use it, connect it to a power station, or charge your devices directly with the cables attached to the panel.
- Adjust your solar panel throughout the day for optimal sun exposure.
- Don't forget that you can still use your panel on a cloudy day, it will just be less efficient.
- Use ground stakes to secure your panel while you're away.
SOLAR CHAINING GUIDE
short
Best portable solar charge kit for the Yeti 1500X. Three Nomad 100 Solar Panels, a 4x 8mm Combiner to connect panels easily, and a 30 ft. High Power Port (HPP) Extension Cable for maximum reach.Â
features
NOMAD 100 HIGHLIGHTS
- 100-Watt (14-22V) foldable and weatherproof solar panel.
- Big wattage and weighs only 10 lbs. For chaining multiple Nomad 100 solar panels together, purchase a 4X 8mm Combiner to High Power Port Connector.
WHAT CAN THE NOMAD 100 CHARGE?
The solar panel does not hold a charge it produces power when it is exposed to sunlight. Connect it to recharge a portable power station. The Nomad 100 is best used for recharging Goal Zero Yetis.
RECOMMENDED YETI PAIRINGS
Yeti 500X: Charges in 6-12 Hours
Yeti 1000X: Charges in 12-24 Hours
Yeti 1500X: Charges in 18-36 Hours
Yeti 3000X: Charges in 36-72 Hours
tech
CHARGE TIMES
- Yeti 1000 Lithium: 5-10 Hours
- Yeti 1000X: 4-8 Hours
- Yeti 1400 Lithium: 7-14 Hours
- Yeti 1500X: 6-12 Hours
- Yeti 3000 Lithium: 12-24 Hours
- Yeti 3000X: 12-24 Hours
*Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
GENERAL
- Product SKU: 13007
- Weight: 10.2 lbs (4.6 kg)
- Dimensions (unfolded): 20.5 x 59.5 x 1 in (52 x 151.1 x 2.54 cm)
- Dimensions (folded): 20.5 x 15.5 x 2 in (52 x 39.37 x 5.08 cm)
- Cable Length: 6 ft.
- Warranty: 2 years
PORTS
- Solar Port (blue 8mm, male): 14-22V, up to 5.56A (100 max)
SOLAR
- Rated Power: 100 Watts
- Open Circuit Voltage (Voc) 21.5V
- Maximum Power Point Voltage (Vmpp): 18.0V
- Maximum Power Point Current (Impp): 5.56A
- Short Circuit Current (Isc): 5.9A
- Cell Type: Monocrystalline
short
Best portable solar charge kit for the Yeti 3000X. Take your kit on the go with three Nomad 200 Solar Panels, a 4x High Power Port (HPP) Combiner to connect panels easily, and a 30 ft. HPP Extension Cable for maximum reach.Â
features
NOMAD 200 HIGHLIGHTS
-
Protective Enclosure
Four monocrystalline panels enclosed in a protective case fold down to a compact profile for easy storage. Hanging loops allow you to strap the panel to vehicles, tents, and more. -
Protective Enclosure
Four monocrystalline panels enclosed in a protective case fold down to a compact profile for easy storage. Hanging loops allow you to strap the panel to vehicles, tents, and more. -
Integrated Cables
Included 6 ft. HPP Charging Cable integrates seamlessly with Goal Zero Yeti Power Stations and stores away in our signature built-in mesh case for convenience.
Recommended Yeti Pairings
Yeti 500X: Charges in 3-6 Hours
(NOTE: Connecting a Yeti 500X to the Nomad 200 requires an High Power Port to 8mm Connector cable)
Yeti 1000X: Charges in 6-12 Hours
Yeti 1500X: Charges in 9-18 Hours
Yeti 3000X: Charges in 18-36 Hours
tech
CHARGE TIMES
- Yeti 400: 3-6 Hours
- Yeti 400 Lithium: 4-7 Hours
- Yeti 500X: 3-6 Hours
- Yeti 1000 Lithium: 8-16 Hours
- Yeti 1000X: 6-12 Hours
- Yeti 1400 Lithium: 11-22 Hours
- Yeti 1500X: 9-18 Hours
- Yeti 3000 Lithium: 18-36 Hours
- Yeti 3000X: 18-36 Hours
- Yeti 6000X: 35-70 Hours
*Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
GENERAL
- Weight: 22 lbs (10.0 kg)
- Dimensions (folded): 28.2 x 22.3 x 2.0 in (71.6 x 56.6 x 5.0 cm)
- Dimensions (unfolded, without leg stand): 28.2 x 100.7 x 1.0 in (71.6 x 255.8 x 2.5 cm)
- Cable Length: 6 ft.
- Warranty: 2 years
- UPC: 847974007983
PORTS
- High Power Port: 14-23V, up to 14A (200W max)
- USB-A: 5V, 2.4A(12W max)
SOLAR
- Rated Power: 200W
- Open Circuit Voltage (Voc): 23.0V
- Maximum Power Point Voltage (Vmpp): 19.1V
- Cell Type: Monocrystalline
short
This efficient 100W solar panel is designed to be easy to install. Mount it to the roof of your van, RV, or home to collect clean energy from the sun. Requires MC4 Solar to HPP Adapter Cable (98014) to plug directly into a Yeti. Sold Separately.Â
tech
CHARGE TIMES
- Yeti 1000X: 12-24 Hours
- Yeti 1500X: 18-36 Hours
- Yeti 3000X: 36-72 Hours
- Yeti Pro 4000: 47 - 94 Hours
GENERAL
- Product SKU: 32420
- Weight:Â 13.2 lbs. (6 kg)
- Dimensions: 38.6 x 23.0 x 1.2 in. (98 x 58.6 x 3 cm)
- Mounting: Z brackets included
- Warranty: 2 years
- Operating Temperature Range: -40-185 °F (-40-85 °C)
PORTS
- Output Port: 4MM (MC4) M/F: 1500 V 30 AÂ 0.9 mÂ
- Guage: 12 AWG
SOLAR
- Rated Power: 100 Watts
-
Peak Power Operating Voltage (Vmp): 17.1 V
-
Peak Power Operating Current (Imp): 5.84 A
- Cell Type: Monocrystalline
-
Open Circuit Voltage (Voc): 20.52 V
-
Short Circuit Current (Isc): 6.14 A
-
Series Fuse Rating: 9 A
-
Temperature Coefficient (Voltage): -0.30%/°C
-
Ingress Protection: IP67
box
BOULDER 100i HIGHLIGHTS
- Installable This installable solar panel is perfect for mounting to your van or RV for extra power on your next road trip.
- Efficient The Boulder 100i has an industry-leading efficiency rating for optimal energy collection and conversion.
- Sturdy Construction The Boulder 100i is built with strong tempered glass and an aluminum frame. It has an IP67 rating for outdoor use and is waterproof so it can stand up to the elements while collecting energy.
Pair Your Panel With a Power Station
See estimates for how quickly your solar panel can recharge Yeti power stations.
Note: Requires MC4 Solar to HPP Adapter Cable (98014) to plug directly into a Yeti. Sold Separately. Charge times will vary based on elevation, temperature, time of year, and angle/position of the panel.
Tips & Tricks for using solar panels
- Your solar panel collects energy, but does not store it. In order to use it, connect it to a power station, or charge your devices directly with the cables attached to the panel.
- Adjust your solar panel throughout the day for optimal sun exposure.
- Don't forget that you can still use your panel on a cloudy day, it will just be less efficient.
- Use ground stakes to secure your panel while you're away.
short
More solar (300 Watts!), less weight. Our lightweight panels let you harness more power from the sun while still being easily transportable from place to place. Perfect for a high-use solar power solution.
tech
CHARGE TIMES
- Yeti 1000 Lithium: 5-10 Hours
- Yeti 1000X: 4-8 Hours
- Yeti 1400 Lithium: 7-14 Hours
- Yeti 1500X: 6-12 Hours
- Yeti 3000 Lithium: 12-24 Hours
- Yeti 3000X: 12-24 Hours
- Yeti PRO 4000: 16-32 Hours
- Yeti 6000X: 24-48 Hours
GENERAL
- SKU: 32450
- Weight: 37.71 lbs (17.12 kg)
- Dimensions (folded):Â 31.26 x 23.39 x 3.8in (79.4 x 59.4 x 9.7cm)
- Dimensions (unfolded, without leg stand):Â 31.26 x94.29 x 0.9in (79.4 x 239.5 x 2.3cm)
- Cable Length: 6ft
- Cable Gauge: 12 AWG
- Warranty: 2 Years
PORTS
- High Power Port (6ft of 12AWG cable): 14-23V, up to 21A (300W max)
SOLAR
- Rated Power: 300W
- Open Circuit Voltage (Voc): 23.0V
- Maximum Power Point Voltage (Vmpp): 19.3V
box
RANGER 300 BRIEFCASE HIGHLIGHTS
-
Convenient, Foldable Design
Four 75-Watt panels, totaling 300 Watts, chained together and connected at the hinge. Easily pack and transport the Ranger 300 from place to place, then store it when not in use. -
Add Solar Power, Not Pounds
Designed with a thinner aluminum frame and PET polymer shield instead of glass, the Ranger 300 adds 100 Watts of solar to the Boulder 200 while shedding 3 lbs. -
Easy to Use
Featuring an innovative, patent-pending design, the Ranger 300 kickstand automatically folds out as you open the panel, allowing you to easily position the panel in place while solar charging. -
Maintain Portability
Built-in handles and magnetized corners make it easier to fold up your panel, pack in the car and go.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it only produces power when it is exposed to sunlight and connected to a power station or bank.
- Optimize solar panel efficiency by positioning them south-facing at a 45-degree angle.
- For faster recharging, use multiple solar panels.
short
Best value solar charge kit for the Yeti 3000X. Maximize charge efficiency with two Ranger 300 Briefcases, a 4x High Power Port (HPP) Combiner, and 30 ft. HPP Extension Cable.Â
tech
CHARGE TIMES
- Yeti 1000 Lithium: 5-10 Hours
- Yeti 1000X: 4-8 Hours
- Yeti 1400 Lithium: 7-14 Hours
- Yeti 1500X: 6-12 Hours
- Yeti 3000 Lithium: 12-24 Hours
- Yeti 3000X: 12-24 Hours
- Yeti 6000X: 24-48 Hours
GENERAL
- KIT SKU:Â 44545
- Weight: 37.71 lbs (17.12 kg)
- Dimensions (folded):Â 31.26 x 23.39 x 3.8in (79.4 x 59.4 x 9.7cm)
- Dimensions (unfolded, without leg stand):Â 31.26 x94.29 x 0.9in (79.4 x 239.5 x 2.3cm)
- Cable Length: 6ft
- Cable Gauge: 12 AWG
- Warranty: 2 Years
PORTS
- High Power Port (6ft of 12AWG cable): 14-23V, up to 21A (300W max)
SOLAR
- Rated Power: 300W
- Open Circuit Voltage (Voc): 23.0V
- Maximum Power Point Voltage (Vmpp): 19.3V
box
RANGER 300 BRIEFCASE HIGHLIGHTS
-
Convenient, Foldable Design
Four 75-Watt panels, totaling 300 Watts, chained together and connected at the hinge. Easily pack and transport the Ranger 300 from place to place, then store it when not in use. -
Add Solar Power, Not Pounds
Designed with a thinner aluminum frame and PET polymer shield instead of glass, the Ranger 300 adds 100 Watts of solar to the Boulder 200 while shedding 3 lbs. -
Easy to Use
Featuring an innovative, patent-pending design, the Ranger 300 kickstand automatically folds out as you open the panel, allowing you to easily position the panel in place while solar charging. -
Maintain Portability
Built-in handles and magnetized corners make it easier to fold up your panel, pack in the car and go.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it only produces power when it is exposed to sunlight and connected to a power station or bank.
- Optimize solar panel efficiency by positioning them south-facing at a 45-degree angle.
- For faster recharging, use multiple solar panels.
short
Redesigned for a more seamless experience, a built-in Flip Power Bank dock and adjustable kickstand for added stability make charging simple. An integrated USB port charges small devices anywhere the sun shines.Â
features
NOMAD 10 HIGHLIGHTS
- Built-in kickstand clicks into place at multiple angles, so you can position your panel for optimal solar collection and ensure it stays put.
- Lightweight design can be strapped to your pack or tent and folds down easily for storage.
- Rugged and durable, built to last as long as your adventures do.
WHAT CAN THE NOMAD 10 CHARGE?
Direct charge your device from the sun or pair your panel with a power bank for an all-in-one solar charging solution. The Nomad 10 is ideal for recharging devices like:
Phones
Power banks
Headlamps
Fitness trackers
Lighthouse lanterns
Small USB devices
RECOMMENDED POWER PAIRINGS
Flip 12: Charges in 2.5-5 HoursFlip 24: Charges in 4-8 Hours
Flip 36: Charges in 6-12 Hours
Venture 35: Charges in 4.5-9 Hours
Venture 75: Charges in 11-22 Hours
Sherpa 100PD: Charges in 15-30 Hours
tech
CHARGE TIMES
- Flip 12: 2.5-5 Hours
- Flip 24: 4-8 Hours
- Flip 36: 6-12 Hours
- Venture 35: 4.5-9 Hours
- Venture 75: 11-22 Hours
- Sherpa 100PD: 15-30 Hours
*Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
GENERAL
- Product SKU: 11900
- Weight: 1.12 lbs (0.51 kg)
- Dimensions (unfolded): 9.5 x 14.5 x 0.75 in (24.1 x 36.8 x 1.9 cm)
- Dimensions (folded): 9.5 x 7.2 x 1.25 in (24.1 x 18.4 x 3.2 cm)
- Warranty: 2 years
- UPC: 847974007648
PORTS
- USB port: 5V, up to 1.5A (7.5W max)
SOLAR
- Rated Power: 10W
- Open Circuit Voltage (Voc): 6-7V
- Cell Type: Monocrystalline
WHAT'S IN THE BOX
- Nomad 10 Solar Panel
short
Whether you’re boondocking, camping, or establishing home backup, these powerful 200-Watt tempered glass panels fold down to an easy-to-carry briefcase for the ultimate on-the-go setup.
box
BOULDER 200 BRIEFCASE HIGHLIGHTS
- 200 total Watts - two 100-Watt panels (14-21.8V) chained together and connected by a hinge.
- Built with strong tempered glass and an aluminum frame with added corner protection.
- Included is a protective canvas bag for easy transport and carrying.
WHAT CAN THE BOULDER 200 BRIEFCASE CHARGE?
The solar panel does not hold a charge - it produces power when it is exposed to sunlight. Connect it to recharge a portable power station. The Boulder 200 Briefcase is best used for recharging Goal Zero Yetis.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it produces power when it is exposed to sunlight.
- Place solar panels towards the sun at an angle.
- Connect High Power Power to Yeti Power Station.
- Adjust solar panel as the sun moves across the sky.
tech
CHARGE TIMES
- Yeti 400: 3-6 Hours*
- Yeti 400 Lithium: 4-7 Hours*
- Yeti 500X: 3-6 Hours*
- Yeti 1000 Lithium: 8-16 Hours
- Yeti 1000X: 6-12 Hours
- Yeti 1400 Lithium: 11-22 Hours
- Yeti 1500X: 9-18 Hours
- Yeti 3000 Lithium: 18-36 Hours
- Yeti 3000X: 18-36 Hours
- Yeti PRO 4000: 24-48 Hours
- Yeti 6000X: 35-70 Hours
GENERAL
- Product SKU: 32409
- Weight: 42 lbs (19 kg)
- Dimensions (folded): 40 x 26.75 x 3.5 in (101.6 x 70 x 8.9 cm)
- Dimensions (unfolded): 40 x 53.5 x 1.75 in (101.6 x 140 x 4.4 cm)
- Cable Length: 6ft
- Warranty: 2 Years
PORTS
- High Power Port: 14-22V, up to 14A (200W max)
SOLAR
- Rated Power: 200 Watts
- Open Circuit Voltage (Voc): 21.8V
- Maximum Power Point Voltage (Vmpp): 18.1V
- Cell Type: Monocrystalline
short
Rugged, durable, rigid. Tempered glass and aluminum frame construction with added corner protection make this a perfect panel for a permanent installation. Ideal for recharging a Yeti 200X.
box
BOULDER 50 HIGHLIGHTS
- 50-Watt (14-22V) panel features integrated kickstand providing optimal angle placement.
- Built with strong tempered glass and an aluminum frame with added corner protection.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Yeti 150: Charges in 5-10 Hours
Yeti 200X: Charges in 5-10 Hours
Yeti 400: Charges in 12-24 Hours
Yeti 500X: Charges in 12-24 Hours
Yeti 1000X: Charges in 23-46 Hours
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it only produces power when it is exposed to sunlight and connected to a power station or bank.
- Optimize solar panel efficiency by positioning them south-facing at a 45-degree angle.
- For faster recharging, use multiple solar panels.
tech
CHARGE TIMES
- Yeti 150: 5-10 Hours
- Yeti 200X: 5-10 Hours
- Yeti 400: 12-24 Hours
- Yeti 400 Lithium: 12-24 Hours
- Yeti 500X: 12-24 Hours
- Yeti 1000 Lithium: 31-62 Hours
- Yeti 1000X: 23-46 Hours
- Yeti 1400 Lithium: 43-86 Hours
GENERAL
- Product SKU: 32406
- Chainable: up to 150 Watts
- Weight: 12.4 lbs (5.6 kg)
- Dimensions: 21.75 x 26.75 x 1.75 in. (55.2 x 70 x 4.4 cm)
- Warranty: 2 years
PORTS
- Solar port (blue, 8mm) output: 14-22V, up to 3.5A (50W max)
- Solar port (blue, 8mm) input chaining: up to 150W total
SOLAR
- Rated Power: 50 Watts
- Open Circuit Voltage: 18-20V
- Cell Type: Monocrystalline
short
The Flex 100i is a flexible monocrystalline solar panel designed for versatility. It works on flat and curved surfaces so you can mount it on vans, RVs, and overland vehicles for renewable power off the grid, wherever you go. IP67 waterproof rating. Requires MC4 Solar to HPP Adapter Cable (98014) to plug directly into a Yeti. Sold Separately.Â
tech
CHARGE TIMES
- Yeti 1000X: 12-24 Hours
- Yeti 1500X: 18-36 Hours
- Yeti 3000X: 36-72 Hours
- Yeti Pro 4000: 47-94 Hours
GENERAL
- Product SKU: 32425
- Weight: 4.85 lbs. (2.2 kg)
- Dimensions: 38.97 x 23.03 x 0.09 in. (990 x 585 x2.55 mm)
- Minimum Bend Radius: 0.4 m in Y direction
- Warranty: 2 years
- Operating Temperature Range: -40-185 °F (-40-85 °C)
PORTS
- Output Port: 4MM (MC4) Male & Female: 1500 V 30 AÂ
- Cable Length: 2.95 ft (0.9 m)Â
- Gauge: 12 AWG
SOLAR
- Rated Power: 100 Watts
-
Peak Power Operating Voltage (Vmp): 17.1 V
-
Peak Power Operating Current (Imp): 5.84 A
- Cell Type: Monocrystalline
-
Open Circuit Voltage (Voc): 20.52 V
-
Short Circuit Current (Isc): 6.14 A
-
Series Fuse Rating: 9 A
-
Temperature Coefficient (Voltage): -0.30%/°C
-
Ingress Protection: IP67
box
Flex 100i HIGHLIGHTS
- Renewable Off-Grid Power Get reliable, clean, renewable energy while you’re off the grid! The Flex 100i is a versatile 100 W monocrystalline solar panel that can recharge your power station from almost anywhere.
- Flexible and Versatile This flexible solar panel is ideal for a wide variety of installations. It’s great for vans, trailers, RVs, boats, and other curved surfaces.
- Adventure-Proof Design The Flex 100i can stand up to the elements and extreme temperatures. It has an IP67 waterproof rating, so you don’t have to worry about it in the rain or snow.
- Thin and Lightweight The Flex 100i weighs less than 5 pounds and is 63% lighter than our rigid 100 W Boulder 100i panel. It is also extremely thin (0.09 inches)—in fact it’s 92% thinner than the Boulder 100i (with the exception of the junction box, which is still less than 1 inch thick).
- High Efficiency The Flex 100i has an industry-leading efficiency rating for optimal energy collection, conversion, and retention.
Pair Your Panel With a Power Station
See estimates for how quickly your solar panel can recharge Yeti power stations.
Note: Requires MC4 Solar to HPP Adapter Cable (98014) to plug directly into a Yeti. Sold Separately. Charge times will vary based on elevation, temperature, time of year, and angle/position of the panel.
Tips & Tricks for using solar panels
- Your solar panel collects energy, but does not store it. In order to use it, connect it to a power station, or charge your devices directly with the cables attached to the panel.
- Adjust your solar panel throughout the day for optimal sun exposure.
- Don't forget that you can still use your panel on a cloudy day, it will just be less efficient.
- Use ground stakes to secure your panel while you're away.
short
The larger Boulder 100 is equipped with the same rugged design as the Boulder 50 but double the Watts. Mount this panel to efficiently charge your Yeti 500X or combine multiple panels together for large power stations.
tech
CHARGE TIMES
- Yeti 200X: 2-4 Hours
- Yeti 400: 6-12 Hours
- Yeti 400 Lithium: 7-14 Hours
- Yeti 500X: 6-12 Hours
- Yeti 1000 Lithium: 16-32 Hours
- Yeti 1000X: 12-24 Hours
- Yeti 1400 Lithium: 22-44 Hours
- Yeti 1500X: 18-36 Hours
- Yeti 3000 Lithium: 36-72 Hours
- Yeti 3000X: 36-72 Hours
GENERAL
- Product SKU: 32407
- Weight: 20.1 lbs (9.1 kg)
- Dimensions: 40.0 x 26.75 x 1.75 in. (101.6 x 70 x 4.4 cm)
- Cable Length: 6 ft
- Warranty: 2 years
PORTS
- Solar Port: (blue, 8mm): 14-22.5V up to 7A (100W max)
SOLAR
- Rated Power: 100 Watts
- Open Circuit Voltage (Voc) 22.5V
- Maximum Power Point Voltage (Vmpp)
- Cell Type: Monocrystalline
box
BOULDER 100 HIGHLIGHTS
- 100-Watt (14-22V) panel features integrated kickstand providing optimal angle placement.
- Built with strong tempered glass and an aluminum frame with added corner protection.
RECOMMENDED YETI PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it only produces power when it is exposed to sunlight and connected to a power station or bank.
- Optimize solar panel efficiency by positioning them south-facing at a 45-degree angle.
- For faster recharging, use multiple solar panels.
short
A versatile four-panel foldable design maximizes solar collection while stationary, then quickly packs away in your car for travel. Pair with a Yeti 200X or 500X to power laptops, portable fridges, and other essentials.
box
NOMAD 50 HIGHLIGHTS
- 50 Watts lets you solar charge power banks and power stations to keep laptops charged, run portable fridges, and power essential electronics.
- Four monocrystalline panels enclosed in a protective case fold down to a compact profile for easy storage and versatility. Hanging loops allow you to strap the panel to vehicles, tents, and more.
- Features built-in charging cables for use with Goal Zero Yeti Power Stations, Sherpa Power Banks, and USB devices. Integrated 8mm cable lets you chain additional solar panels for faster charge times.
RECOMMENDED POWER PAIRINGS
Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it produces power when it is exposed to sunlight.
- Place solar panels towards the sun at an angle.
- Connect 8mm solar cable to Yeti Power Station.
- Adjust solar panel as the sun moves across the sky.
tech
CHARGE TIMES
- Sherpa 100AC: 3-6 Hours
- Yeti 150: 5-10 Hours
- Yeti 200X: 4-8 Hours
- Yeti 400: 12-24 Hours
- Yeti 400 Lithium: 13-26 Hours
- Yeti 500X: 12-24 Hours
GENERAL
- SKU: 11920
- Chainable: up to 150 Watts
- Weight: 6.85 lbs (3.1 kg)
- Dimensions (unfolded): 17 x 53 x 1.5 in (43.2 x 134.6 x 3.8 cm)
- Dimensions (folded): 17 x 11.25 x 2.5 in (43.2 x 28.6 x 6.4 cm)
- Cable Length: 6ft
- Warranty: 2 Years
- UPC: 847974007679
PORTS
- Solar Port (blue, 8mm, male): 14-21.5V, up to 3.3A (50W max)
- USB-A Port: 5V, up to 2.4A (12W max)
SOLAR
- Rated Power: 50W
- Open Circuit Voltage (Voc): 21.5V
- Maximum Power Point Voltage (Vmpp): 18.0V
- Cell Type: Monocrystalline
short
This 20-Watt foldable panel is durable enough for any adventure, yet sleek enough to fit in any pack or bag. Integrated cable storage, built-in Flip dock, and an adjustable kickstand power small to medium-sized devices.
features
NOMAD 20 HIGHLIGHTS
- Built-in kickstand clicks into place at multiple angles, so you can position your panel for optimal solar collection.
- Integrated 8mm cable and USB port let you charge a range of small to medium size devices including phones, tablets, power banks, and more. If you want to capture more sun, the 8mm cable lets you chain additional solar panels for faster charge time.
- Rugged and durable, built to last as long as your adventures do.
WHAT CAN THE NOMAD 20 CHARGE?
The solar panel does not hold a charge it produces power when it is exposed to sunlight. You can plug your phone directly into the panel or use it to recharge a portable recharger for later use. The Nomad 20 is best used for recharging things like:
Phones
Power banks
Headlamps
Fitness trackers
Lighthouse lanterns
Small USB devices
Small Power stations
Recommended Power Pairings
Flip 36: Charges in 4-8 Hours
Venture 35: Charges in 4-8 Hours
Venture 75: Charges in 6-11 Hours
Sherpa 100PD: Charges in 8-16 Hours
Sherpa 100AC: Charges in 7.5-15 Hours
Yeti 200X: Charges in 11-22 Hours
Yeti 500X: Charges in 29-58 Hours
tech
CHARGE TIMES
- Flip 36: 4-8 Hours
- Venture 35: 4-8 Hours
- Venture 75: 7-14 Hours
- Sherpa 100PD: 9-18 Hours
- Sherpa 100AC: 7.5-15 Hours
- Yeti 200X: 11-22 Hours
*Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
GENERAL
- SKU: 11910
- Weight: 2.28 lbs (1.03 kg)
- Dimensions (unfolded): 11.5 x 21.75 x 0.75 in (29.2 x 55.3 x 1.9 cm)
- Dimensions (folded): 11.5 x 7.4 x 1.25 in (29.2 x 19 x 3.2 cm)
- Cable length: 6ft
- Warranty: 2 years
- UPC: 847974007655
PORTS
- Solar Port (blue, 8mm, male): 14 - 22V, up to 1.3A (20W max)
- USB port: 5V, up to 2.1A (10.5W max)
SOLAR
- Rated Power: 20W
- Open Circuit Voltage (Voc): 18 - 22V
- Cell Type: Monocrystalline
WHAT'S IN THE BOX
- Nomad 20 Solar Panel
short
A lightweight solution for on-the-go power from the sun, the Nomad 5 features 5 Watts of monocrystalline laminate in a rugged enclosure with an easy-to-use kickstand USB output and built-in Flip Power Bank dock.
features
NOMAD 5 HIGHLIGHTS
- 5-Watt panel gives you the solar collecting capability needed to charge your phone anywhere the sun shines.
- Built-in kickstand clicks into place at multiple angles, so you can easily position your panel for optimal solar collection.
- Rugged and durable, built to last as long as your adventures do.
WHAT CAN THE NOMAD 5 CHARGE?
Solar panels do not hold a charge, they produce power when exposed to sunlight. For the best charging experience, pair with a Flip 12 power bank to keep devices charged on the go. Simply plug the Flip into the panel's built-in charging dock to charge the battery from sun while hiking, biking, or on the move. Then, use the Flip to charge your phone when the sun goes down. The Nomad 5 is great for charging things like:
Headlamps
Phones
Other smaller USB devices
Goal Zero Power Banks
tech
PORTS
- USB Port: 5V, up to 1A (5W max)
GENERAL
- Product SKU: 11500
- Weight: 12.7 oz (360 g)
- Dimensions: 9.5 x 7 x 0.8 in (24 x 17.8 x 2.0 cm)
- Max Leg Angle: 180 degrees
- Warranty: 2 years
SOLAR
- Capacity: 5V, 5W
- Cell Type: Monocrystalline
WHAT'S IN THE BOX
- Nomad 5 Solar Panel
short
Our Nomad 400 solar panels give you lots of power in a lightweight, portable design. Chain two together for 800 W of solar and fast charging. Take them on the road to recharge your Yeti indefinitely or use them at home to collect emergency power when the grid is down.d is down.
tech
CHARGE TIMES
- Yeti PRO 4000: 6 - 12 Hours
- Yeti PRO 8000: 12 - 24 Hours
- Compatible with Yeti PRO 4000. This bundle is not compatible with the Yeti X line due to voltage restrictions.Â
GENERAL
- KIT SKU: 44583
- Product SKU: 11950
- Weight:Â 36.60 lbs. (16.6 kg)
- Dimensions (Folded): 28.54 x 31.69 x 1.18 in. (72.5 x 80.5 x 3 cm)
- Dimensions (Unfolded):Â 113.98 x 31.69 x 0.2 in. (289.5 x 80.5 x 0.5 cm)
- Panel Construction: Lamination
- Ingress Protection: IP65
- Warranty: 2 Year
- Operating Temperature Range: -40-185 °F (-40-85 °C)
- Maximum System Voltage: 1000 V
PORTS
- Output Port (HPP): Â 14-150V, 40 A, 400W
- Cable Length: 35.43 in (0.9 m)
- Guage: 12 AWG
- 15 ft HPP Extention (Included): 15 ft, 12 AWG
- Output Port (USB-A): 5 V, 2.4 A, 12 W, 7.87 in (0.2 m) 12 AWG
SOLAR
- Rated Power: 400 Watts
- Peak Power Operating Voltage (Vmp): 20.66 V
- Peak Power Operating Current (Imp): 20.45 A
- Cell Type: Monocrystalline
- Open Circuit Voltage (Voc): 23.84 V
- Short Circuit Current (Isc): 20.45 A
- Series Fuse Rating: 15 A
- Temperature Coefficient (Voltage): -0.30%/°C
- Temperature Coefficient (Current): -0.44%/°C
- Temperature Coefficient (Power): -0.44%/°C
box1
NOMAD 400 HIGHLIGHTS
- POWERFUL This portable panel provides 400 Watts of solar so you can recharge your power station faster.
- PORTABLE The Nomad 400 is designed to be easy to take with you, whether you’re overlanding, camping, or setting up in the backyard during a power outage. It’s lightweight and folds down to be more compact—plus it includes a shoulder strap and carrying handles.
- EFFICIENT The Nomad 400 has an industry-leading efficiency rating for optimal energy collection, conversion, and retention.
Pair Your Panel With a Power Station
See estimates for how quickly your solar panel can recharge Yeti power stations.
Note: Charge times will vary based on elevation, temperature, time of year, and angle/position of the panel.
Tips & Tricks for using solar panels
- Your solar panel collects energy, but does not store it. In order to use it, connect it to a power station, or charge your devices directly with the cables attached to the panel.
- Adjust your solar panel throughout the day for optimal sun exposure.
- Don't forget that you can still use your panel on a cloudy day, it will just be less efficient.
- Use ground stakes to secure your panel while you're away.
SOLAR CHAINING GUIDE
short
Two of our 200-Watt Boulder Briefcase Solar Panels for the ultimate on-the-go setup. Whether you're boondocking, camping, or needing panels for your backup, the included High Power Port (HPP) Combiner and 30 ft. HPP Extension Cable make this ideal for any off-grid scenario.
box
BOULDER 200 BRIEFCASE HIGHLIGHTS
- 200 total Watts - two 100-Watt panels (14-21.8V) chained together and connected by a hinge.
- Built with strong tempered glass and an aluminum frame with added corner protection.
- Included is a protective canvas bag for easy transport and carrying.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it produces power when it is exposed to sunlight.
- Place solar panels towards the sun at an angle.
- Connect High Power Power to Yeti Power Station.
- Adjust solar panel as the sun moves across the sky.
tech
CHARGE TIMES
- Yeti 1000 Lithium: 4-8 Hours
- Yeti 1000X: 6-12 Hours
- Yeti 1400 Lithium: 5-10 Hours
- Yeti 1500X: 4-8 Hours
- Yeti 3000 Lithium: 9-18 Hours
- Yeti 3000X: 9-18 Hours
- Yeti 6000X: 12-24 Hours
* Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
GENERAL
- Product SKU: 32409
- Weight: 42 lbs (19 kg)
- Dimensions (folded): 40 x 26.75 x 3.5 in (101.6 x 70 x 8.9 cm)
- Dimensions (unfolded): 40 x 53.5 x 1.75 in (101.6 x 140 x 4.4 cm)
- Cable Length: 6 ft.
- Warranty: 2 years
PORTS
- High Power Port: 14-22V, up to 14A (200W max)
SOLAR
- Rated Power: 200 Watts
- Open Circuit Voltage (Voc): 21.8V
- Maximum Power Point Voltage (Vmpp): 18.1V
- Cell Type: Monocrystalline
short
Four of our 200-Watt Boulder Briefcase Solar Panels for the ultimate home setup. The included High Power Port (HPP) Combiner and (4) 15 ft. HPP Extension Cables make this ideal for any high-power usage home.Â
features
BOULDER 200 BRIEFCASE HIGHLIGHTS
- 200 total Watts - two 100-Watt panels (14-21.8V) chained together and connected by a hinge.
- Built with strong tempered glass and an aluminum frame with added corner protection.
- Included is a protective canvas bag for easy transport and carrying.
WHAT CAN THE BOULDER 200 BRIEFCASE CHARGE?
The solar panel does not hold a charge - it produces power when it is exposed to sunlight. Connect it to recharge a portable power station. The Boulder 200 Briefcase is best used for recharging Goal Zero Yetis.
RECOMMENDED YETI PAIRINGS
(NOTE: Connecting a Yeti 500X to the Boulder 200 Briefcase requires an High Power Port to 8mm Connector cable)
Yeti 1000X: Charges in 6-12 Hours
Yeti 1500X: Charges in 9-18 Hours
Yeti 3000X: Charges in 18-36 Hours
WHAT'S IN THE BOX
tech
CHARGE TIMES
- Yeti 3000 Lithium: 4-8 Hours
- Yeti 3000X: 4-8 Hours
- Yeti 6000X: 9-18 Hours
* Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
GENERAL
- Product SKU: 32409
- Weight: 42 lbs (19 kg)
- Dimensions (folded): 40 x 26.75 x 3.5 in (101.6 x 70 x 8.9 cm)
- Dimensions (unfolded): 40 x 53.5 x 1.75 in (101.6 x 140 x 4.4 cm)
- Cable Length: 6 ft.
- Warranty: 2 years
PORTS
- High Power Port: 14-22V, up to 14A (200W max)
SOLAR
- Rated Power: 200 Watts
- Open Circuit Voltage (Voc): 21.8V
- Maximum Power Point Voltage (Vmpp): 18.1V
- Cell Type: Monocrystalline
short
Our Nomad 400 solar panels give you lots of power in a lightweight, portable design. Chain four together for 1600 W of solar and fast charging. Take them on the road to recharge your Yeti indefinitely or use them at home to collect emergency power when the grid is down. For use with Yeti PRO 4000 only.
Â
tech
CHARGE TIMES
- Yeti PRO 4000: 3 - 6 Hours
- Yeti PRO 8000: 6 - 12 Hours
- Compatible with Yeti PRO 4000. This bundle is not compatible with the Yeti X line due to voltage restrictions.Â
GENERAL
- KIT SKU: 44584
- Product SKU: 11950
- Weight:Â 36.60 lbs. (16.6 kg)
- Dimensions (Folded): 28.54 x 31.69 x 1.18 in. (72.5 x 80.5 x 3 cm)
- Dimensions (Unfolded):Â 113.98 x 31.69 x 0.2 in. (289.5 x 80.5 x 0.5 cm)
- Panel Construction: Lamination
- Ingress Protection: IP65
- Warranty: 2 Year
- Operating Temperature Range: -40-185 °F (-40-85 °C)
- Maximum System Voltage: 1000 V
PORTS
- Output Port (HPP): Â 14-150V, 40 A, 400W
- Cable Length: 35.43 in (0.9 m)
- Guage: 12 AWG
- 15 ft HPP Extention (Included): 15 ft, 12 AWG
- Output Port (USB-A): 5 V, 2.4 A, 12 W, 7.87 in (0.2 m) 12 AWG
SOLAR
- Rated Power: 400 Watts
- Peak Power Operating Voltage (Vmp): 20.66 V
- Peak Power Operating Current (Imp): 20.45 A
- Cell Type: Monocrystalline
- Open Circuit Voltage (Voc): 23.84 V
- Short Circuit Current (Isc): 20.45 A
- Series Fuse Rating: 15 A
- Temperature Coefficient (Voltage): -0.30%/°C
- Temperature Coefficient (Current): -0.44%/°C
- Temperature Coefficient (Power): -0.44%/°C
box1
NOMAD 400 HIGHLIGHTS
- POWERFUL This portable panel provides 400 Watts of solar so you can recharge your power station faster.
- PORTABLE The Nomad 400 is designed to be easy to take with you, whether you’re overlanding, camping, or setting up in the backyard during a power outage. It’s lightweight and folds down to be more compact—plus it includes a shoulder strap and carrying handles.
- EFFICIENT The Nomad 400 has an industry-leading efficiency rating for optimal energy collection, conversion, and retention.
Pair Your Panel With a Power Station
See estimates for how quickly your solar panel can recharge Yeti power stations.
Note: Charge times will vary based on elevation, temperature, time of year, and angle/position of the panel.
Tips & Tricks for using solar panels
- Your solar panel collects energy, but does not store it. In order to use it, connect it to a power station, or charge your devices directly with the cables attached to the panel.
- Adjust your solar panel throughout the day for optimal sun exposure.
- Don't forget that you can still use your panel on a cloudy day, it will just be less efficient.
- Use ground stakes to secure your panel while you're away.
SOLAR CHAINING GUIDE
short
Our Nomad 400 solar panels give you lots of power in a lightweight, portable design. Chain eight together for 3200 W of solar and fast charging. Take them on the road to recharge your Yeti indefinitely or use them at home to collect emergency power when the grid is down.
tech
CHARGE TIMES
- Yeti PRO 4000: 1.5 - 3 Hours
- Yeti PRO 8000: 3 - 6 Hours
- Compatible with Yeti PRO 4000. This bundle is not compatible with the Yeti X line due to voltage restrictions.Â
GENERAL
- KIT SKU: 44585
- Product SKU: 11950
- Weight:Â 36.60 lbs. (16.6 kg)
- Dimensions (Folded): 28.54 x 31.69 x 1.18 in. (72.5 x 80.5 x 3 cm)
- Dimensions (Unfolded):Â 113.98 x 31.69 x 0.2 in. (289.5 x 80.5 x 0.5 cm)
- Panel Construction: Lamination
- Ingress Protection: IP65
- Warranty: 2 Year
- Operating Temperature Range: -40-185 °F (-40-85 °C)
- Maximum System Voltage: 1000 V
PORTS
- Output Port (HPP): Â 14-150V, 40 A, 400W
- Cable Length: 35.43 in (0.9 m)
- Guage: 12 AWG
- 15 ft HPP Extention (Included): 15 ft, 12 AWG
- Output Port (USB-A): 5 V, 2.4 A, 12 W, 7.87 in (0.2 m) 12 AWG
SOLAR
- Rated Power: 400 Watts
- Peak Power Operating Voltage (Vmp): 20.66 V
- Peak Power Operating Current (Imp): 20.45 A
- Cell Type: Monocrystalline
- Open Circuit Voltage (Voc): 23.84 V
- Short Circuit Current (Isc): 20.45 A
- Series Fuse Rating: 15 A
- Temperature Coefficient (Voltage): -0.30%/°C
- Temperature Coefficient (Current): -0.44%/°C
- Temperature Coefficient (Power): -0.44%/°C
box1
NOMAD 400 HIGHLIGHTS
- POWERFUL This portable panel provides 400 Watts of solar so you can recharge your power station faster.
- PORTABLE The Nomad 400 is designed to be easy to take with you, whether you’re overlanding, camping, or setting up in the backyard during a power outage. It’s lightweight and folds down to be more compact—plus it includes a shoulder strap and carrying handles.
- EFFICIENT The Nomad 400 has an industry-leading efficiency rating for optimal energy collection, conversion, and retention.
Pair Your Panel With a Power Station
See estimates for how quickly your solar panel can recharge Yeti power stations.
Note: Charge times will vary based on elevation, temperature, time of year, and angle/position of the panel.
Tips & Tricks for using solar panels
- Your solar panel collects energy, but does not store it. In order to use it, connect it to a power station, or charge your devices directly with the cables attached to the panel.
- Adjust your solar panel throughout the day for optimal sun exposure.
- Don't forget that you can still use your panel on a cloudy day, it will just be less efficient.
- Use ground stakes to secure your panel while you're away.
SOLAR CHAINING GUIDE
short
Best mobile solar charge kit for the Yeti 3000X. Complete your setup with three Boulder 200 Briefcases, a 4x High Power Port (HPP) Combiner, and 30 ft. HPP Extension Cable for faster charge times.Â
features
BOULDER 200 BRIEFCASE HIGHLIGHTS
- 200 total Watts - two 100-Watt panels (14-21.8V) chained together and connected by a hinge.
- Built with strong tempered glass and an aluminum frame with added corner protection.
- Included is a protective canvas bag for easy transport and carrying.
WHAT CAN THE BOULDER 200 BRIEFCASE CHARGE?
The solar panel does not hold a charge - it produces power when it is exposed to sunlight. Connect it to recharge a portable power station. The Boulder 200 Briefcase is best used for recharging Goal Zero Yetis.
RECOMMENDED YETI PAIRINGS
(NOTE: Connecting a Yeti 500X to the Boulder 200 Briefcase requires an High Power Port to 8mm Connector Cable)
Yeti 1000X: Charges in 6-12 Hours
Yeti 1500X: Charges in 9-18 Hours
Yeti 3000X: Charges in 18-36 Hours
tech
CHARGE TIMES
- Yeti 1400 Lithium: 4-8 Hours
- Yeti 1500X: 3-6 Hours
- Yeti 3000 Lithium: 6-12 Hours
- Yeti 3000X: 6-12 Hours
- Yeti 6000X: 12-24 Hours
*Solar charge times vary and are dependent on many factors such as elevation, temperature, time of year, angle and position to the sun.
GENERAL
- Product SKU: 32409
- Weight: 42 lbs (19 kg)
- Dimensions (folded): 40 x 26.75 x 3.5 in. (101.6 x 70 x 8.9 cm)
- Dimensions (unfolded): 40 x 53.5 x 1.75 in. (101.6 x 140 x 4.4 cm)
- Cable Length: 6 ft
- Warranty: 2 years
PORTS
- High Power Port: 14-22V, up to 14A (200W max)
SOLAR
- Rated Power: 200 Watts
- Open Circuit Voltage (Voc): 21.8V
- Maximum Power Point Voltage (Vmpp): 18.1V
- Cell Type: Monocrystalline
short
Designed for maximum portability. Includes a Boulder 100 Briefcase and 10-Amp Charge Controller to safely and efficiently charge 12V batteries. A canvas carrying bag and integrated kickstand offers easy setup anywhere.
box
Boulder 100 Briefcase Solar Charging Kit
- Boulder 100 Briefcase Solar Charging Kit comes with a pre-installed 10A Charge Controller, integrated 8mm Connector, Spade to SAE Cable, and SAE to Alligator Clips plus SAE to Ring Terminal options for connecting to 12V batteries. No additional cables or accessories required.
- To charge a Goal Zero Yeti Power Station with the Boulder 100 Solar Kit, you simply disconnect the female 8mm Connector Cable on the solar panel from the male 8mm Connector Cable on the Charge Controller and plug it into the 8mm input port on the Yeti.
Boulder 100 Briefcase Highlights
- 100 total Watts - two 50-Watt panels (14-21.5V) chained together and connected by a hinge.
- Built with strong tempered glass and an aluminum frame with added corner protection.
- Included is a protective canvas bag for easy transport and carrying.
recommended yeti solar pairings
These recommendations will allow you to recharge 80-100% of your Yeti Battery in each day of full sun.
Â
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it produces power when it is exposed to sunlight.
- Place solar panels towards the sun at an angle.
- Connect High Power Power to Yeti Power Station.
- Adjust solar panel as the sun moves across the sky.
tech
PORTS
- Solar Port (blue, 8mm): 14-21.5V, up to 7A (100W max)
- Input/Output terminal: M5 terminals
- Fuse: 15A replaceable
General
- Product SKU: 44210
- Weight: 28.25 lbs (12.8kg)
- Dimensions (folded): 26.75 x 21.75 x 3.75 in (70 x 55.2 x 8.9 cm)
- Dimensions (unfolded): 26.75 x 43.5 x 1.75 in (70 x 110.4 x 4.4 cm)
- Cable Length: 6 ft.
- Spade to 8mm: 3 ft.
- Spade to SAE: 15 ft.
- SAE to Ring: 23 in.
- SAE to Alligator: 29 in.
- Warranty: 2 years
Battery Details
- Charge Controller: PWM
- Rated solar panel amps GZ-10: 10A
- Normal input solar cell array voltage: 15-22V
- Max solar cell array voltage (output has no load): 25V
- Lowest operating voltage at solar or battery side: 8V Minimum
- Charging Characteristics:
- Start Voltage at 25°C: 3-10V
- Charge Voltage at 25°C:
- LTO battery: 14.0V
- Gel battery: 14.1V
- LiFePO4 battery: 14.4V
- Charge Voltage at 25°C: AGM battery-14.4V
- WET battery: 14.7V
- Calcium battery: 14.9V
- Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
- Float Voltage at 25°C:
- Gel, AGM, WET, Calcium batteries-13.6V
- LTO and LiFePO4 batteries-13.4V
- Battery temperature compensation coefficient: -24mV/°C
Solar
- Rated Power: 100 Watts
- Open Circuit Voltage (Voc): 21.5V
- Maximum Power Point Voltage (Vmpp): 17.2V
- Cell Type: Monocrystalline
short
Pack up your solar panels and easily transport them with a durable travel case. Includes built-in handle and removable shoulder strap. Zippered bag fits the Boulder 100 Briefcase, or two Boulder 50 Solar Panels.
tech
GENERAL
- SKU: 92100
- Dimensions: 28 x 22 x 4 in. (71.1 x 55.9 x 10.2 cm)
- Weight:1.8 lbs (0.82 kg)
short
A simple mounting bracket kit for installing the Boulder 50 or 100 Solar Panels. Comes with four brackets and hardware, ideal for installation on vehicle roofs and non-inhabited buildings.
tech
GENERAL
- Product SKU: 44050
- Product Weight: 2.2 oz (62 g) per bracket
- Dimensions: 3.5 x 2.25 x 1.5 in. (8.9 x 5.7 x 3.8 cm)
- Warranty: 2 years
short
Pack up your solar panels and easily transport them with a durable travel case. Includes built-in handle and removable shoulder strap. Zippered bag fits the Boulder 200 Briefcase, or two Boulder 100 Solar Panels.
tech
GENERAL
- SKU: 92200
- Dimensions: 41 x 28 x 4 in. (104.1 x 71.1 x 10.2 cm)
- Weight: 2.7 lbs (1.22 kg)
short
This powerful, portable kit features a hinged 200-Watt panel and 20-Amp Charge Controller to speed up charge times of 12V batteries. Includes a canvas carrying bag and integrated kickstand for easy transport and setup.
box
BOULDER 200 BRIEFCASE SOLAR CHARGING KIT
- Boulder 200 Solar Kit comes with a pre-installed 20A Charge Controller, integrated High Power Port for connecting to solar, Spade to SAE Cable, and SAE to Alligator Clips plus SAE to Ring Terminal options for connecting to 12V batteries. No additional cables or accessories required.
- To charge a Goal Zero Yeti Power Station with the Boulder 200 Solar Kit, you simply disconnect the High Power Port Cable on the solar panel from the High Power Port Cable on the Charge Controller and plug it into the High Power Port on the Yeti.
BOULDER 200 BRIEFCASE HIGHLIGHTS
- 200 total Watts - two 100-Watt panels (14-21.8V) chained together and connected by a hinge.
- Built with strong tempered glass and an aluminum frame with added corner protection.
- Included is a protective canvas bag for easy transport and carrying.
recommended yeti solar pairings
These recommendations will allow you to recharge 80-100% of your Yeti Battery in each day of full sun.
Tips & Tricks for using solar panels
- The solar panel does not hold a charge - it produces power when it is exposed to sunlight.
- Place solar panels towards the sun at an angle.
- Connect High Power Power to Yeti Power Station.
- Adjust solar panel as the sun moves across the sky.
tech
PORTS
- High Power Port: 14-22V, up to 14A (200W max)
- Solar Input Port (High Power Port): 14-23V, up to 14A
- Fuse: 25A replaceable
General
- Product SKU: 44220
- Weight: 44.45 lbs (20.16 kg)
- Dimensions (folded): 40 x 26.75 x 3.5 in (101.6 x 70 x 8.9 cm)
- Dimensions (unfolded): 40 x 53.5 x 1.75 in (101.6 x 140 x 4.4 cm)
- Cable Length:
- Spade to HPP: 3Ft
- Spade to SAE: 15Ft
- SAE to Ring: 23in
- SAE to Alligator: 29in
- Warranty: 2 years
Battery Details
- Charge Controller: PWM
- Rated solar panel amps GZ-10: 20A
- Normal input solar cell array voltage: 15-22V
- Max solar cell array voltage (output has no load): 25V
- Lowest operating voltage at solar or battery side: 8V Minimum
- Charging Characteristics:
- Start Voltage at 25°C: 3-10V
- Charge Voltage at 25°C:
- LTO battery: 14.0V
- Gel battery: 14.1V
- LiFePO4 battery: 14.4V
- Charge Voltage at 25°C: AGM battery-14.4V
- WET battery: 14.7V
- Calcium battery: 14.9V
- Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
- Float Voltage at 25°C:
- Gel, AGM, WET, Calcium batteries-13.6V
- LTO and LiFePO4 batteries-13.4V
- Battery temperature compensation coefficient: -24mV/°C
Solar
- Rated Power: 200 Watts
- Open Circuit Voltage (Voc): 21.8V
- Maximum Power Point Voltage (Vmpp): 18.1V
- Cell Type: Monocrystalline
Boulder Features
- Built with a lightweight, durable aluminum frame and tempered glass, ideal for semi-permanent or permanent installations.
- Collapsible kickstands allows for easy positioning and strong rubber corner protection leaves no sharp edges to catch.
- Features Goal Zero’s 8mm connector to directly charge Sherpa Power Packs and Goal Zero Yeti Portable Power Stations.
- Designed to work with traditional Z Brackets for easier installation on vans and campers.
Nomad Solar Panels
Foldable and Packable
Lightweight and highly portable, ideal for collecting power from the sun when you are on the go. Features removeable kickstand with zippered pocket.
Power Collection
Recharge your phones and devices right from the sun by plugging directly into your panel or pair with a power bank to store power for later.
Cost
Nomad Solar Panels are more pricey per Watt. Patent-pending intelligent charging technology and ultimate portability result in higher overall cost of the panel.
Boulder Solar Panels
Rugged and Rigid
Strong tempered glass and an aluminum frame, ideal for temporary or permanent installation when portability is not an issue.
Power Collection
Pair with our largest portable power stations to connect and store big power for off-grid living, whether in a cabin or a camper.
Cost
Boulder Solar Panels are not as expensive per Watt. Heavier weight and less portability result in lower overall cost of the panel.
We took solar power from stationary to portable, from rooftops to backpacks. Powering your phone, headlamp, camera or whatever essential gear is in your kit from the sun is a reality. It’s a little surreal, opening a solar panel, plugging in a phone, and watching as it starts to charge. The science behind solar is powerfully interesting:
- THE SOLAR POWER HOUSE - Nuclear fusion at the sun’s core creates energy, released in the form of light. The sun’s light takes an 8½ minute trip to the earth – even though we’re 93 million miles apart.
- ELECTRON PLAYGROUNDS - Solar panels contain two layers of carefully grown silicon slices with a uniform pathway in between. Energetic electrons in the negatively charged top layer are itching to jump to the positively charged bottom; all they need is a little push in the right direction.
- SUN SPONGES - Think of it like solar billiards. Visible and invisible light from the sun hits the top-layer electrons like a cue ball, and gives them the push they need to break loose and race toward the bottom layer, creating a current as they move.
- HERDING THE ELECTRON FLOW - Pathways created in the solar panels harness moving electrons, acting like a waterslide and forcing the energy where you want it.
- PLUGGING IN - An open solar panel is generating quite a bit of energy; the key is to harness that power and put it to good use. Placing a battery in the middle of the electron waterslide allows you to collect and store energy – which charges your battery.